Re: TI-H: gb?

[Prev][Next][Index][Thread]
Follow-Ups: References:
;Yes. Easily. All we need to know is the buss timing... Then we could >have TV tunners for calcs, and this would probably pass if it wasn't to >big... > >Grant > > >>Can it directly draw to the LCD tho? >> >>At 10:40 PM 12/6/98 -0900, you wrote: >>> >>>There is no way the PIC or AVR could handle NTSC. They could do it at a >>>very very low resolution (blurly text) but thats it... >>> >>>In fact I've done it before, and you get big blocks of white areas. >>>Printing to monitors is alot easier than reading... >>> >>>What we need is the Scenix or PPC. They can handle the entire feed and can >>>shorten the res down to the calc's size... >>> >>>Grant >>> >>> >>>>Well the code shouldn't be too dificult, or long. We could get away with a >>>>PIC or AVR, it doesn't matter. Assuming it is a greyscale camara (B/W), >>>>then it should be even easier. The only other problem is that if we wanted >>>>to have greyscale, then we'd have to draw direct to the LCD. I think this >>>>is possible via asm, is it? I thought the guy who wrote the ZShell asm >>>>guide was going to write a section on this... I'm not sure... ? >>>> >>>>>>I think it sounds like a cool idea, and see no reason to make >suggestions >>>>>like >>>>>>go buy a camera. It was merely a thought, and IMO a rather good one. >Just >>>>my >>>>>>$.02 >>>>> >>>>>Either a quick cam and AVR/PIC/HC11/Z80/6800/6802/8008/4000 or what ever >>>>>you want to use. Or we could just use a scenix or PPC embedded processor >>>>>to decode a live NTSC feed. >>>>> >>>>>Grant >>>>> >>>>> >>> >>> >>> > > >
Follow-Ups: References: