Re: TI-H: gb?
[Prev][Next][Index][Thread]
Re: TI-H: gb?
Can it directly draw to the LCD tho?
At 10:40 PM 12/6/98 -0900, you wrote:
>
>There is no way the PIC or AVR could handle NTSC. They could do it at a
>very very low resolution (blurly text) but thats it...
>
>In fact I've done it before, and you get big blocks of white areas.
>Printing to monitors is alot easier than reading...
>
>What we need is the Scenix or PPC. They can handle the entire feed and can
>shorten the res down to the calc's size...
>
>Grant
>
>
>>Well the code shouldn't be too dificult, or long. We could get away with a
>>PIC or AVR, it doesn't matter. Assuming it is a greyscale camara (B/W),
>>then it should be even easier. The only other problem is that if we wanted
>>to have greyscale, then we'd have to draw direct to the LCD. I think this
>>is possible via asm, is it? I thought the guy who wrote the ZShell asm
>>guide was going to write a section on this... I'm not sure... ?
>>
>>>>I think it sounds like a cool idea, and see no reason to make suggestions
>>>like
>>>>go buy a camera. It was merely a thought, and IMO a rather good one. Just
>>my
>>>>$.02
>>>
>>>Either a quick cam and AVR/PIC/HC11/Z80/6800/6802/8008/4000 or what ever
>>>you want to use. Or we could just use a scenix or PPC embedded processor
>>>to decode a live NTSC feed.
>>>
>>>Grant
>>>
>>>
>
>
>
Follow-Ups:
References: