Re: TI-H: Lcd Problem

To: <ti-hardware@lists.ticalc.org>
Subject: Re: TI-H: Lcd Problem
From: "Andrew Boudreau" <johnpb@keynet.net>
Date: Fri, 29 May 1998 16:49:22 -0500
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
Reply-To: ti-hardware@lists.ticalc.org



ok that was the problem i fixed it by taping some cardboard over that part
really tight then forcing the cover back on and it works fine.. =) thanx



>
>On Fri, 29 May 1998, Andrew Boudreau wrote:
>
>> i am sure its come up a million times but the right like 10 pixels won't
>> come up on the calc lcd.. somechick dropped it and i check the wiring its
>> all perfect .. what can cause this ! i could find anything loose or
cracked
>> either !
>
>LCDs use a very low voltage, so if a connector is slightly disconnected
>it'll probably not work. The connectors are very narrow as well, so it
>becomes much easier to disconnect them. Try pressing lightly on the ribbon
>cable above the columns which aren't working and see if the pixels come
>on. If they do, it means the ribbon isn't attached to the LCD very well.
>
>--
>Greg Hill
>greg-hill@bigfoot.com
>www.comports.com/link
>
>

Prev: Re: TI-H: Lcd Problem
Next: TI-H: ti 83 am radio and speakers
Index(es):
- Main
- Thread