Re: TI-H: 2.5mm

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: 2.5mm
From: Bryan Rittmeyer <bryanr@flash.net>
Date: Tue, 28 Jul 1998 11:06:49 -0400
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
References: <Pine.PCW.3.96.980727073639.3806G-100000@MICRON>
Reply-To: ti-hardware@lists.ticalc.org

Greg Hill wrote:

> is it a 2.5mm plug, or a 3.5mm (1/8 inch, common on consumer headsets)
> plug? Sounds like it's bigger than 2.5mm if the metal won't even go in. If
> that's the case, I think Radio Shack has a 2.5mm to 3.5mm adapter plug.

You need to be careful with the converter, because it has a metal lip
on it that the TI<->TI cable lacks. The TI cable doesn't use stereo
plugs (which is what the adapter has) and as such the radio shack
adapter could damage your link port.

Sorry about sending the previous post twice. Read the one with
the smiley :)

Regards,

Bryan

-- 
Bryan Rittmeyer
mailto:bryanr@flash.net
http://www.flash.net/~bryanr/

Follow-Ups:

Re: TI-H: 2.5mm

From: Julian <julian63@geocities.com>

Re: TI-H: 2.5mm

From: "Tomislav Filipcic" <tojo@SoftHome.net>

References:

Re: TI-H: 2.5mm

From: Greg Hill <gregh@xmission.com>

Prev: TI-H: TI-85 E2 Driver Released (Was: I need the memory expander chip!)
Next: Re: TI-H: 2.5mm
Index(es):
- Main
- Thread