Re: TI-H: another internal idea..
[Prev][Next][Index][Thread]
There are solder points close to the jack that you could solder the link
wires from the calc to the link unit, and also, I think if you soldered it
onto the plastic it would kinda melt...?
"This is the most logical route, Captain"
-= Zenon@bbs.nexes.com =-
----------
: From: ti-hardware@lists.ticalc.org
: To: Zenon
: Subject: TI-H: another internal idea..
: Date: November 5, 1996 7:41 PM
:
:
: what if instead of making the thing internal find out a way to put it on
the
: cover of the calc.. with all the new super flat stuff (for the pc cards
: etc.) you could probably find a way to fit the circut on your cover..
then
: you could just use a little 1 inch long plug to plug that into the link
: port.. then it would not look like you had anything connected unless you
: look at it closer... but there has to be someway of diguising (sp.) this
: transmitter/reciver because even if it wasn't during a test my teacher
: probably wouldnt want me to havve somthing pluged into my calc.. he
dosen't
: really like the idea of me having a 92 let alone a 92 with a box
attatched
: to it..
:
: David Lee
: >>POINT FOUR TECHNOLOGIES<<
:
:
:
References: