Re: A92: romconv problem

To: assembly-92@lists.ticalc.org
Subject: Re: A92: romconv problem
From: Florent Zara <zara@club-internet.fr>
Date: Thu, 04 Sep 1997 14:54:58 +0200
References: <B0003189868@bulldog.wmc.edu>
Reply-To: assembly-92@lists.ticalc.org

Hi, 

 i've read all your conversation about "romconv problem", and i've
tried, but i'm french and there is a place in this text i can't
understand (i put it into **...**) could you explain it to me in easy
words ?  
            Thanx you (Email directly if you don't want to overload this
list)
           Florent Zara
           zara@club-internet.fr

Kevin Barnhart wrote:

> Yeah,  the gray graphlink cable.  Use the Hyperterminal program that ships
> with windows 95 (or something similar), set the baud rate to 9600 and the
> port to com2 (or wherever you have your cable plugged into).  Don't bother
> to do any of the modem setup garbage, as long as you get connected to your
> calc.  Then just go up to the bar and choose capture text.  It will ask you
> for a text file ** to dump the stuff into and I find it handy to have a text
> file already created before I start the hyperterminal program**.  After you
> have the file selected just hit yes (or whatever the next command is on the
> dialog box), and run the romdump2 program (ASCII version) on your calc.  You
> should almost immediately see ascii come up on the screen.  The dump should
> take about 15 min (approximately) since your speed is 9600 and you have an
> entire meg to dump.  From here on I can't seem to get the rest to work.  Let
> me know if you do.
> 
> Kevin Barnhart
> itstmp2@wmc.edu

Follow-Ups:

Re: A92: romconv problem

From: Jeremy Braun <hoopy-frood@geocities.com>

References:

Re: A92: romconv problem

From: Kevin Barnhart <itstmp2@wmc.edu>