LF: /fargo/fterm/modem/problems/please/read/
[Prev][Next][Index][Thread]
LF: /fargo/fterm/modem/problems/please/read/
Hmm, i have no clue....heres the problem:
I hooked everything up (correctly), and typed "AT" it said "OK"
After trying many different commands, i arrived at the following:
The modem will take ANY COMMAND that starts with AT, and say OK
AT = OK
ATZ = OK
ATKDFJDIHGH = OK
ATXXXXXXXXX = OK
AT<anything> = OK
BUT THE MODEM WILL N O T DIAL -- I type ATDT####### and NOTHING
I hooked the modem up to my COMPUTER, went to PROCOMM, installed it as a
new modem, and it worked fine -- dialed and everything.
I copied the command string it used, and tried that on the calc - nothing
ANY IDEAS?
HERE ARE MINE:
I am thinking it is something with the modem's DTR setting. Since it is
like a compact modem (that CAN use a 9V batt or Plug) it's DTR is funny.
I tried the DTR commands, still didn't help
The instruction book talks about PIN # 20 for signaling the modem for DTR
however this is for the BATTERY mode
There is only 4 lights on the modem
1) High speed
2) Low speed
3) Carrier Detect
4) Low Battery
==================
Have a:
US Robotics World Port
9696 v.42 bis Fax / Data Modem
Latest ver of FTERM
GREY TI GRAPH LINK
Null Adapters & Gender Changer
| / h
| / t
|/ i
|\ e
| \ i
| \ t
| \ h
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\ Keith \\\\\ rdkk@oeonline.com \\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\