Re: A86: putsprite

To: assembly-86@lists.ticalc.org
Subject: Re: A86: putsprite
From: Andy Johnson <prjohnson@utahlinx.com>
Date: Sun, 13 Sep 1998 22:39:02 -0600
Delivered-To: assembly-86-outgoing@towerguard.unix.edu.sollentuna.se
In-Reply-To: <4f206eb1.35fb579e@aol.com>
Reply-To: assembly-86@lists.ticalc.org


At 01:26 AM 9/13/98 EDT, you wrote:
>ok, 
>
>I got putsprite,   edited it to fit my needs(Its not copyright is it?  wait
>dont respond to that, I dont want to go into that copyright crap again)
>
>I converted it to HEX and copyed it to my calc.  I made sure I double checked
>EVERYTHING in the HEX code.  I ran it on my calc but it came up with some
>error(it didn't crash my calc)
>
>I made sure that it worked before I put it on my calc by running the asm file
>in ti86emu.  I ran fine and did what I wanted it to.  but It didn't do it on
>my calc.   I am wondering if it was the conversion that screwed it all up.
>could this be?
>
>Below is the code:
<code sniped, check the archives if you need it>

What was the error message?
--
Andy Johnson <prjohnson@utahlinx.com>

References:

A86: putsprite

From: BlAsTo1414@aol.com

Prev: A86: ld HL call
Next: Re: A86: ld HL call
Index(es):
- Main
- Thread