[A83] Re: many questions

To: assembly-83@lists.ticalc.org
Subject: [A83] Re: many questions
From: Olle Hedman <alh@home.se>
Date: Thu, 31 Jan 2002 17:30:16 +0100
In-reply-to: <002301c1aa59$4f84d080$0100a8c0@kingkong>
References: <F180sL1c00goZolmRBa00004b7c@hotmail.com>
Reply-To: assembly-83@lists.ticalc.org

At 14:15 2002-01-31, you wrote:

>There are three internal clips which hold the calculator halves together.
>One is at the top by the screen in the center. The other two are along the
>sides near the bottom. Just take a large flat screwdriver and pry it in
>between the halves. Run it down over the clips and they will pop open. I've
>found no matter how hard I pull apart nothing ever breaks.

A tip is to use a corner of the slidecase instead of a scredriver. less 
risk to dent or damage or scratch the caseing.
(plastic of the same hardness, instead of a hard metal thing)

///Olle

References:

[A83] Re: many questions

From: "Michael J" <harry3003@hotmail.com>

[A83] Re: many questions

From: "Michael Vincent" <hookman@worldnet.att.net>