[A83] Re: many questions
[Prev][Next][Index][Thread]
[A83] Re: many questions
There are three internal clips which hold the calculator halves together.
One is at the top by the screen in the center. The other two are along the
sides near the bottom. Just take a large flat screwdriver and pry it in
between the halves. Run it down over the clips and they will pop open. I've
found no matter how hard I pull apart nothing ever breaks.
Michael Vincent
Detached Solutions - www.detacheds.com
Radical Software - www.radicalsoft.org
----- Original Message -----
From: "Michael J" <harry3003@hotmail.com>
To: <assembly-83@lists.ticalc.org>
Sent: Wednesday, January 30, 2002 9:02 PM
Subject: [A83] Re: many questions
>
>
> I can take out the screws fine but the problem is that the calculator
halves
> won't open all the way. They open about .5 inches and then they refuse to
> move. I am afraid to force it open because i might break something.
Thanks.
> >From: "Michael Vincent" >Reply-To: assembly-83@lists.ticalc.org >To:
> >Subject: [A83] Re: many questions >Date: Wed, 30 Jan 2002 20:17:42 -0700
> >>>You should be able to open your calculator and remove the tip. Why
can't
> you >open it? >>Michael Vincent >Detached Solutions - www.detacheds.com
> >Radical Software - www.radicalsoft.org >----- Original Message -----
>From:
> "Michael J" >To: >Sent: Wednesday, January 30, 2002 6:40 PM >Subject:
[A83]
> many questions >>>>1. The very tip(top 1/2 cm) of my link cable broke off
> inside my >>calculatorand i don't know how to get it out! I tried opening
my
> TI-83 >but >>it doesn't let me. It's lodged in there so if anybody knows
> whati should >>doplease help! 2. Does the command call _getk recognize
> multiple >kepresses >>and how much slower is it than direct input? call
> _getkoutputs a number >to >>op2 so how would you convert that to a
variable
> and use it in a program? >3. >>Does anybody know where i can find a
version
> of ion for the rom version >>1.10? Ion only works with 1.08- because those
> calculators are slow. >>Ionfastcopy does not work correctly on rom version
> 1.10. Or could i edit >the >>current version and make my own? Thanks.
>
>>>>------------------------------------------------------------------------
> -- >-- >>MSN Photos is the easiest way to share and print your photos:
Click
> >Here[1] >>>>>>--- Links --- >>1 'http://go.msn.com/bql/hmtag3_etl_EN.asp'
> >>>>>>
>
> --------------------------------------------------------------------------
--
> Get your FREE download of MSN Explorer at http://explorer.msn.com[1].
>
>
> --- Links ---
> 1 'http://go.msn.com/bql/hmtag_etl_EN.asp'
>
>
Follow-Ups:
References: