Re: A83: TI-83+ Assembly Programs
[Prev][Next][Index][Thread]
Re: A83: TI-83+ Assembly Programs
I made that change, but I still get ERR:INVALID when I use
the Asm(prgmX) format. Here's the code again. I'm trying this on the
Virtual TI emulator, could this be the problem? It's BOOT Code 1.00, BASE
Code 1.03. I found a ROM update on www.ti.com, but I can't get it onto
the emulator. Could someone check out my code and tell me if it works for
them?
Thanks
Jeremy
.NOLIST ; Defines area which isn't code.
#define end .end
#define END .end
#define equ .equ
#define EQU .equ
#include "ti83plus.inc"
.LIST ; Defines area which IS code.
.org userMem-2
.db $BB,6D
bcall(_clrLCDFull)
ld hl,0000h
ld (PENCOL),hl
ld hl,str1
bcall(_vputs)
ld hl,0001h
ld (CURROW),hl
ld hl,0000h
ld (CURCOL),hl
ld hl,str2
bcall(_puts)
ret
str1:
.db "This is small writing.",0
str2:
.db "This is big. ",0
.end
END
On Sun, 20 Feb 2000, Robin Kay wrote:
>
> All the ION batch file does is rename the file to .8xp, I know that batch file
> works becuse I am using it to compile TSE. Replace .org userMem with...
>
> .org userMem-2
> .db $BB, $6D
>
> --Robin Kay--
>
>
> Jkhum98@aol.com wrote:
>
> > There may be a problem with Devpac for the 83, and the output files that seem
> > to be for the 83+... In the quotes below with directions about that batch
> > file, I see that it is simply renaming from 83p to 8xp, and Im not sure if
> > this will work for the 83+. The header may be different for each... I would
> > try compiling your prog with the ION batch file from ion.zip, which will
> > correctly produce the 8xp. You would just leave out the ION compatibility
> > header, so that you can run it from the OS. Try that and see if it works...
> >
> > Jason_K
> >
> > In a message dated 2/19/00 10:59:51 PM Central Standard Time,
> > jedrake@linknet.kitsap.lib.wa.us writes:
> >
> > > It still won't work. I get ERR:INVALID when I try to run it. I think I
> > > must be doing something wrong. Could someone check out this program and
> > > see if it works for them, or just tell me if there is something I'm doing
> > > wrong? I copied the BCALL macro from the ion.inc file instead of using
> > > the ti83plus.inc version's original form because the original form gave me
> > > errors in TASM. The line is #define bcall(xxxx) rst 28h \ .dw xxxx
> > >
> > > Thanks
> > > Jeremy
> > >
> > >
> > > .NOLIST ; Defines area which isn't code.
> > > #define end .end
> > > #define END .end
> > > #define equ .equ
> > > #define EQU .equ
> > > #include "ti83plus.inc"
> > > .LIST ; Defines area which IS code.
> > > .org userMem
> > > bcall(_clrLCDFull)
> > > ld hl,0000h
> > > ld (PENCOL),hl
> > > ld hl,str1
> > > bcall(_vputs)
> > > ld hl,0001h
> > > ld (CURROW),hl
> > > ld hl,0000h
> > > ld (CURCOL),hl
> > > ld hl,str2
> > > bcall(_puts)
> > > ret
> > > str1:
> > > .db "This is small writing.",0
> > > str2:
> > > .db "This is big. ",0
> > > .end
> > > END
> > >
> > >
> > > On Sun, 20 Feb 2000, Robin Kay wrote:
> > >
> > > >
> > > > 1) Make sure you have tasm, ti83plus.inc and devpac83* all in the same
> > > directory.
> > > > 2) Create the file asm83p.bat at put the following in it:-
> > > >
> > > > @echo off
> > > > tasm -80 -i -b %1.asm %1.bin
> > > > devpac83 %1
> > > > del %1.bin >nul
> > > > del %1.8xp >nul
> > > > rename %1.83p %1.8xp >nul
> > > >
> > > > 3) Then type 'asm83p ' followed by the name of the source file excluding
> > > extension
> > > >
> > > > 4) Use the graphlink cable and software to send send the resulting .8xp
> > > file to
> > > > your calculator
> > > > 5) Press**: 2ND - 0 - Scroll down to 'Asm(' - ENTER - PRGM - Select the
> > > program -
> > > > ENTER - ENTER
> > > >
> > > > * You can get this from ticalc, I think...
> > > > ** This equates to: Asm(prgmNAMEOFPROGRAM
> > > >
> > > > Jeremy wrote:
> > > >
> > > > > Thanks. Now how do i get it onto my calculator?
> > > > >
> > > > > Jeremy
> > > > >
> > > > > On Sat, 19 Feb 2000, Robin Kay wrote:
> > > > >
> > > > > >
> > > > > > You need to use bcall(xxxx) instead of call xxxx. For example:
> > > > > >
> > > > > > bcall(_clrLCDFull)
> > > > > >
> > > > > > --Robin Kay--
> > > > > >
> > > > > > Jeremy wrote:
> > > > > >
> > > > > > > I converted a sample program from the ASMGURU file to 83 plus, but
> > > it
> > > > > > > won't work. I don't know how to get it from the ASM to something
> > > the
> > > > > > > calculator can run and how to get the calculator to run it. I
> > have
> > > TASM
> > > > > > > 3.01. How do I get an ASM program to work on the 83 Plus? I put
> > > the code
> > > > > > > below, so if I missed something I need, let me know.
> > > > > > >
> > > > > > > Thanks
> > > > > > > Jeremy
> > > > > > >
> > > > > > > .NOLIST ; Defines area which isn't code.
> > > > > > > #define end .end
> > > > > > > #define END .end
> > > > > > > #define equ .equ
> > > > > > > #define EQU .equ
> > > > > > > #include "ti83plus.inc"
> > > > > > > .LIST ; Defines area which IS code.
> > > > > > > .org userMem
> > > > > > >
> > > > > > > call _clrLCDFull
> > > > > > > ld hl,0000h
> > > > > > > ld (PENCOL),hl
> > > > > > > ld hl,str1
> > > > > > > call _vputs
> > > > > > > ld hl,0001h
> > > > > > > ld (CURROW),hl
> > > > > > > ld hl,0000h
> > > > > > > ld (CURCOL),hl
> > > > > > > ld hl,str2
> > > > > > > call _puts
> > > > > > > ret
> > > > > > > str1:
> > > > > > > .db "This is small writing.",0
> > > > > > > str2:
> > > > > > > .db "This is big. ",0
> > > > > > > .end
> > > > > > > END
> > > > > >
>
>
Follow-Ups:
References: