Re: A83: TI-83+ Assembly Programs
[Prev][Next][Index][Thread]
Re: A83: TI-83+ Assembly Programs
All the ION batch file does is rename the file to .8xp, I know that batch file
works becuse I am using it to compile TSE. Replace .org userMem with...
.org userMem-2
.db $BB, $6D
--Robin Kay--
Jkhum98@aol.com wrote:
> There may be a problem with Devpac for the 83, and the output files that seem
> to be for the 83+... In the quotes below with directions about that batch
> file, I see that it is simply renaming from 83p to 8xp, and Im not sure if
> this will work for the 83+. The header may be different for each... I would
> try compiling your prog with the ION batch file from ion.zip, which will
> correctly produce the 8xp. You would just leave out the ION compatibility
> header, so that you can run it from the OS. Try that and see if it works...
>
> Jason_K
>
> In a message dated 2/19/00 10:59:51 PM Central Standard Time,
> jedrake@linknet.kitsap.lib.wa.us writes:
>
> > It still won't work. I get ERR:INVALID when I try to run it. I think I
> > must be doing something wrong. Could someone check out this program and
> > see if it works for them, or just tell me if there is something I'm doing
> > wrong? I copied the BCALL macro from the ion.inc file instead of using
> > the ti83plus.inc version's original form because the original form gave me
> > errors in TASM. The line is #define bcall(xxxx) rst 28h \ .dw xxxx
> >
> > Thanks
> > Jeremy
> >
> >
> > .NOLIST ; Defines area which isn't code.
> > #define end .end
> > #define END .end
> > #define equ .equ
> > #define EQU .equ
> > #include "ti83plus.inc"
> > .LIST ; Defines area which IS code.
> > .org userMem
> > bcall(_clrLCDFull)
> > ld hl,0000h
> > ld (PENCOL),hl
> > ld hl,str1
> > bcall(_vputs)
> > ld hl,0001h
> > ld (CURROW),hl
> > ld hl,0000h
> > ld (CURCOL),hl
> > ld hl,str2
> > bcall(_puts)
> > ret
> > str1:
> > .db "This is small writing.",0
> > str2:
> > .db "This is big. ",0
> > .end
> > END
> >
> >
> > On Sun, 20 Feb 2000, Robin Kay wrote:
> >
> > >
> > > 1) Make sure you have tasm, ti83plus.inc and devpac83* all in the same
> > directory.
> > > 2) Create the file asm83p.bat at put the following in it:-
> > >
> > > @echo off
> > > tasm -80 -i -b %1.asm %1.bin
> > > devpac83 %1
> > > del %1.bin >nul
> > > del %1.8xp >nul
> > > rename %1.83p %1.8xp >nul
> > >
> > > 3) Then type 'asm83p ' followed by the name of the source file excluding
> > extension
> > >
> > > 4) Use the graphlink cable and software to send send the resulting .8xp
> > file to
> > > your calculator
> > > 5) Press**: 2ND - 0 - Scroll down to 'Asm(' - ENTER - PRGM - Select the
> > program -
> > > ENTER - ENTER
> > >
> > > * You can get this from ticalc, I think...
> > > ** This equates to: Asm(prgmNAMEOFPROGRAM
> > >
> > > Jeremy wrote:
> > >
> > > > Thanks. Now how do i get it onto my calculator?
> > > >
> > > > Jeremy
> > > >
> > > > On Sat, 19 Feb 2000, Robin Kay wrote:
> > > >
> > > > >
> > > > > You need to use bcall(xxxx) instead of call xxxx. For example:
> > > > >
> > > > > bcall(_clrLCDFull)
> > > > >
> > > > > --Robin Kay--
> > > > >
> > > > > Jeremy wrote:
> > > > >
> > > > > > I converted a sample program from the ASMGURU file to 83 plus, but
> > it
> > > > > > won't work. I don't know how to get it from the ASM to something
> > the
> > > > > > calculator can run and how to get the calculator to run it. I
> have
> > TASM
> > > > > > 3.01. How do I get an ASM program to work on the 83 Plus? I put
> > the code
> > > > > > below, so if I missed something I need, let me know.
> > > > > >
> > > > > > Thanks
> > > > > > Jeremy
> > > > > >
> > > > > > .NOLIST ; Defines area which isn't code.
> > > > > > #define end .end
> > > > > > #define END .end
> > > > > > #define equ .equ
> > > > > > #define EQU .equ
> > > > > > #include "ti83plus.inc"
> > > > > > .LIST ; Defines area which IS code.
> > > > > > .org userMem
> > > > > >
> > > > > > call _clrLCDFull
> > > > > > ld hl,0000h
> > > > > > ld (PENCOL),hl
> > > > > > ld hl,str1
> > > > > > call _vputs
> > > > > > ld hl,0001h
> > > > > > ld (CURROW),hl
> > > > > > ld hl,0000h
> > > > > > ld (CURCOL),hl
> > > > > > ld hl,str2
> > > > > > call _puts
> > > > > > ret
> > > > > > str1:
> > > > > > .db "This is small writing.",0
> > > > > > str2:
> > > > > > .db "This is big. ",0
> > > > > > .end
> > > > > > END
> > > > >
Follow-Ups:
References: