San Messenger v3.0
program made in BASIC. Constructed in 2004 by Sander Smolenaers
-------------------------------------------

As the program starts (start it the old-fashioned way; prgm -> SMSN and push [ENTER]), you will see
a menu. It should contain the following submenu's:

1: START
2: HELP
3: ABOUT sMsn
4: QUIT

1: START

This instruction will start the program. It will display the word 'Connecting...'. When this word appears,
connect the cable, BUT MAKE SURE THE OTHER CALC ISN'T CONNECTING TOO! The other calc must be in normal mode.
When the connecting calc has connected, start sMsn on the other calc, and connect. Then you should
be able to start chatting.

2: HELP

You can push '+' and [ENTER] if you only want to receive what the person on the other calc types. Hold [DEL]
to quit this mode.
You can type '/EXIT' (the '/' is the 'divided by'-key) to quit the program.
Type '/SMSNDATA' to get the version e.d. of the programme. This is the same as '3: ABOUT sMsn' in the main menu.
Finally, typing '/Pic1' (You can find 'Pic1' pressing VARS -> 4 -> 1 to put the instruction on the screen) will
send Pic1 to the other calc.

3: ABOUT sMsn

Here will appear:
1.Version
2.Jaar(Year in Dutch)
3.Editor (Me! :P)

4: QUIT

Quit the program. After the program has quitted, there will appear 'sMsn(r),2004' in the bottom of the screen. You
can erase this line simply by pressing [CLEAR].


Well, i hope this is sufficient information to get this program working for you.
If not, I'd be happy to give you answers. Mail me at spongebob3@hotmail.com