[TI-H] Re: TI-83 Parallel link cable
[Prev][Next][Index][Thread]
[TI-H] Re: TI-83 Parallel link cable
Ok, first of all, my serial cable is acting weird. And second, I don't have
my parallel cable anymore, stripped some parts for the serial cable. If I
connect my serial cable to my computer the LED works perfectly indicating
that the circuit is OK (Right?) But if I try to send a file, it doesn't get
a link, and the calculator begins to run VERY slowly (It practicly freezes)
I used the schematic on http://home.wanadoo.nl/ti83world/cables_make.html
and I tried sending a file and receiving the screen with both the TI proggie
and the CAL program. Anyone have any idea on how to solve this problem?
Tristan
>From: Ronald Teune <RTWolf@gmx.net>
>Reply-To: ti-hardware@lists.ticalc.org
>To: ti-hardware@lists.ticalc.org
>Subject: [TI-H] Re: TI-83 Parallel link cable
>Date: Mon, 2 Sep 2002 15:08:37 +0200 (MEST)
>
>
>my parallel cable works perfectly, with 83+, TiLP, silent linking (did you
>use that?)
>
> > i had the same problem a while ago, i found the parallel link was very
> > unreliable (even though it is the simplest and cheapest) it olny seemed
>to
> > work proprly and reliably with the ti-82, luckly for me i got the ti-83+
> > and
> > a free black link cable from ti
> > arnt i luky? so now dont need to worry bout the link
> > ----- Original Message -----
> > From: "Tristan Schaap" <tristanschaap60@hotmail.com>
> > To: <ti-hardware@lists.ticalc.org>
> > Sent: Sunday, September 01, 2002 9:46 PM
> > Subject: [TI-H] Re: TI-83 Parallel link cable
> >
> >
> > >
> > > I tested it on the test program from the ti-calc.org site, and a
>program
> > > called CAL. I've already tried 1. Removing the resistors from the
>design
> > 2.
> > > Replacing the batteries in the TI-83. (The test program from the site
> > works,
> > > but not all of them work. The screen capture doesn't work (Times out)
> > the
> > > LC85 program works fine, and the TEST program works fine too).
> > >
> > >
> > > >From: "David Phillips" <david@acz.org>
> > > >Reply-To: ti-hardware@lists.ticalc.org
> > > >To: <ti-hardware@lists.ticalc.org>
> > > >Subject: [TI-H] Re: TI-83 Parallel link cable
> > > >Date: Sun, 1 Sep 2002 05:55:25 -0500
> > > >
> > > >
> > > >Tristan Schaap writes:
> > > > > I just built a link cable (The parallel version from the site),
>but
> > > > > I'm having some trouble. According to several programs, the link
> > > > > cable is fine. But when I try to send it gives an Error in Xmit
> > > > > error. If I try to send a file from the calc to the PC it gives
>the
> > > > > same error on the calc, and a 'Header too large' error on the PC.
> > Can
> > > > > anyone please help me with this? (I've also tried using different
> > > > > comps, a P90, a P120 and a PIII900)
> > > >
> > > >Your question is lacking some crucial information. Which programs
>make
> > you
> > > >think the cable is fine? Which program gives you the error message?
> > > >
> > > >Be aware that you cannot use the TI software with a parallel link.
>You
> > > >must
> > > >use special link software that has support for it.
> > > >
> > > >--
> > > >David Phillips <david@acz.org>
> > > >http://david.acz.org/
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>--
>Groeten,
> Ronald Teune @School
> http://www.zeekoe.tk
> http://www.nietszeggend.cjb.net (niet van mij, wel een aanrader)
> Anything that's good&useful is made of chocolats
>
>GMX - Die Kommunikationsplattform im Internet.
>http://www.gmx.net
Follow-Ups: