Brenden McNeil
Microsoft Certified Professional
A+ Certified Service Technician
bmcneil@delanet.com
Fax: (305) 675-0871
AOL Instant Messenger: mcneil1458
ICQ: 9155183
http://www.bmcneil.com
-----Original Message-----
From: owner-ti-hardware@lists.ticalc.org [mailto:owner-ti-hardware@lists.ticalc.org]On Behalf Of FusionWEB Design Co.
Sent: Sunday, January 02, 2000 2:14 PM
To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: Ethernet 10BASE2 cabling testerTrue...(See, I can brag like you too)Chris Bunting, FusionWEB Design Co.
MCSE and A+ Certified
ICQ 452-1236
PH 717.569.7508/9610
http://www.fission2.com
http://www.perlnation.com----- Original Message -----From: Brenden McNeil <bmcneil@delanet.com>Sent: Sunday, January 02, 2000 10:56 AMSubject: RE: TI-H: Ethernet 10BASE2 cabling tester
Well a good meter wont lie, but a 20MHz signal and an oscilloscope is
better.
Brenden McNeil
Microsoft Certified Professional
A+ Certified Service Technician
bmcneil@delanet.com
Fax: (305) 675-0871
AOL Instant Messenger: mcneil1458
ICQ: 9155183
http://www.bmcneil.com
> -----Original Message-----
> From: owner-ti-hardware@lists.ticalc.org
> [mailto:owner-ti-hardware@lists.ticalc.org]On Behalf Of Grant Stockly
> Sent: Saturday, January 01, 2000 10:58 PM
> To: ti-hardware@lists.ticalc.org
> Subject: RE: TI-H: Ethernet 10BASE2 cabling tester
>
>
>
> I never trust meters...
>
> I send a 20MHz signal through the cable and look at it from the other end
> (no terminator).
>
> If it comes out within standard tol. of 10b2 ethernet, I let it be. If
> not, I check for shielding holes with an interference meter.
>
> But...the biggest reason for doing this is so that 10.756GHz signals don't
> get all messed up. Not ethernet.
>
> Grant
>
>
> >I always use a meter...
> >
> >Brenden McNeil
> >Microsoft Certified Professional
> >A+ Certified Service Technician
> >bmcneil@delanet.com
> >Fax: (305) 675-0871
> >AOL Instant Messenger: mcneil1458
> >ICQ: 9155183
> >http://www.bmcneil.com
> >
> >
> >> -----Original Message-----
> >> From: owner-ti-hardware@lists.ticalc.org
> >> [mailto:owner-ti-hardware@lists.ticalc.org]On Behalf Of Per Jonsson
> >> Sent: Saturday, January 01, 2000 3:50 PM
> >> To: ti-hardware@lists.ticalc.org
> >> Subject: TI-H: Ethernet 10BASE2 cabling tester
> >>
> >>
> >>
> >>
> >> Does anybody have some sort of plans to build a cabling tester for
> >> 10BASE2, for example to check you have crimped the connectors
> correctly?
> >>
> >> /Per
> >>
> >>
> >>
>
>
>