Re: TI-H: parallel link problems

Re: TI-H: parallel link problems

• To: ti-hardware@lists.ticalc.org
• Subject: Re: TI-H: parallel link problems
• From: Olle Hedman <oh@hem.passagen.se>
• Date: Sat, 22 Apr 2000 11:09:49 +0200
• References: <20000419160647.A897@TK212017118241.teleweb.at> <4.3.1.0.20000419162311.00aaf9c0@pop.netzero.net>
• Reply-To: ti-hardware@lists.ticalc.org

Mine was without resistors at first. And it worked perfectly with the ti83 I
built it for.
So it works fine with your ti89 HW1?
Any other calc is uninteresting, since it is only with the 89 it is problems (as
far as I know)

//Olle

Rob Smith wrote:
> 
> i've never had a problem with my parallel link, but i built it differently,
> no resistors for me. and make sure your parallel port is in normal or spp
> mode, not epp or ecp. also, does your calc work fine calc2calc with that cable?
>

• Re: TI-H: parallel link problems
• From: Rob Smith <Kormoc@netzero.net>

• TI-H: parallel link problems
• From: Leonard Stiles <ljs@uk2.net>
• Re: TI-H: parallel link problems
• From: Rob Smith <Kormoc@netzero.net>

• Prev: Re: TI-H: parallel link problems
• Next: Re: TI-H: parallel link problems
• Index(es):
  • Main
  • Thread