Re: TI-H: Arrrrrrrrrrrrrrrrrhhhh!!!! HELP!


[Prev][Next][Index][Thread]

Re: TI-H: Arrrrrrrrrrrrrrrrrhhhh!!!! HELP!




Yes, I'm sure they would get rid of the turbo switch.

Grant

>Thanks, I did do a switch and now have it working, the problem was the
>capacitor had gone when I was soldering it.  I replaced it with a 29pf and I
>is working.  Surely there is somewhere to but that type of cable!  I can see
>how it is connected and am sure I could re-do it if I could get the cable!
>Any sugestions where to get that type of cable on the net?  Also Will TI get
>rid of the turbo switch etc If i send it to them.  I have had it just less
>than a year.
>
>
>Justin.
>justin18@geocities.com
>
>-----Original Message-----
>From: Brian Watson <pilotcar@iserv.net>
>To: ti-hardware@lists.ticalc.org <ti-hardware@lists.ticalc.org>
>Date: 27 September 1998 20:30
>Subject: Re: TI-H: Arrrrrrrrrrrrrrrrrhhhh!!!! HELP!
>
>
>>
>>Justin (JUSTIN18@geocities.com) wrote:
>>
>>>1)  When opening the case to turbo it the screwdriver cut the y-axis
>display
>>>ribbon in half so #i only have 1/2 a working display.  All the webpages
>said
>>>be careful of this when soldering but none mentioned when opening the
>case!
>>>They say it is irreplacable but there must be a way!  If not then can I
>buy
>>>the top board as this would be easy to replace.
>>
>>You're screwed.  There is no way to replace it.  You can't order a new
>>display either.  If your warranty's still good you might want to send it
>>back to TI.  If it's out of warranty TI charges $50 to replace it.
>>
>>>2)After being turboed the calc works much faster ( but with 1/2 display!).
>>>Trouble is I am having trouble useing the parallel link which worked fine
>>>before.  Is this because of the turboing or maybe something to do with the
>>>display?
>>
>>You can't have the calc on turbo if you want to transfer files
>>efficiently.  That's why you install a switch so you can have it on
>>either speed.
>>
>>--Brian
>>
>>_________________________________
>>Brian Watson (pilotcar@iserv.net)
>>AIM: Moofit
>>_________________________________
>>



References: