Re: TI-H: TI Modem
[Prev][Next][Index][Thread]
Re: TI-H: TI Modem
>Instead of having to access the link port (at 36 kilobits baud or whatever it
>is) a chip can be hooked up directly to the CPU of the TI92 (through the ROM
>expansion module) and be accessed at about a megabyte a second (I BELIEVE, may
>not be quite that fast. It also depends on the software used to read the
>data.)
You can get it to 5k a second through the link port.
The 68000 at that speed can do ~8MB a second.
>on a normally clocked TI92. This would require only the chip that you
>need to access with no serial interface. It's cheaper (you don't need a
>serial
>interface), simpler (you don't need program in all the serial stuff, you just
>copy a memory location) and a whole lot faster (already discussed).
Sorry,
You're going to have to do more than just write to a memory location.
Follow-Ups:
References: