Re: TI-H: $4 Serial Link won't work
[Prev][Next][Index][Thread]
Re: TI-H: $4 Serial Link won't work
I have the same program with everything else byt cal, a dos based link
program. Nothing else work with my serial link, also, I can't make a memory
backup. It always end with cal saying 'header too long'... =(
Markus Räty
(markus.raty@usa.net)
-----Original Message-----
From: SHIVANJJS@aol.com <SHIVANJJS@aol.com>
To: ti-hardware@lists.ticalc.org <ti-hardware@lists.ticalc.org>
Date: 5. maaliskuuta 1999 7:07
Subject: Re: TI-H: $4 Serial Link won't work
>
>In a message dated 3/4/99 8:26:19 PM Pacific Standard Time,
>alan.harper@usa.net writes:
>
>> Hi, i was wondering if somebody might be able to put me in the right
>> direction to getting my serial link working. When i plug it in to my
serial
>> port, the LED comes on, and when i plug it in to my calculator (an 83,
but
>> happens to 82 i've tried aswell), it causes it to 'freeze'. as soon as i
>> unplug either the cable from the computer, or from the calcualtor, after
>> about 2 seconds, it returns to normal.
>>
>> i've checked all the connections, checked all the solder joins (i did
mine
>> on a pcb), and everything was ok, i got my electronics teacher too have
a
>> look at it, he checked everything, but still no go. the only thing that
i
>> can think that it might be is the diodes, i asked for 4.7v zeners, but i
>> didn't know what wattage, so i got 400mw ones.
>>
>> i also would like to get my hands on a rom file, so at least i can use
an
>> emulator to start to learn asmbler, but if anyone could help i would be
>very
>> greatful.
>>
>> Alan Harper
>my 83 will freeze unless i start the link software and the only one that
works
>for me is wtran8x 16bit, i use a parallel though
>-JJS
>