Re: TI-H: LED Backlight

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: LED Backlight
From: "David Knaack" <dknaack@hotmail.com>
Date: Tue, 26 Jan 1999 08:50:59 PST
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
Delivered-To: ti-hardware@lists.ticalc.org
Reply-To: ti-hardware@lists.ticalc.org


>From: joachim.armbruster@gmx.de
<snip>
>I opened my TI92 and it seems that its very very difficult to put a 
>backlight panel in it. The LCD looks like there are 2 connectors 
>(you know, those flat foils to drive the lcd) on on the top and one on 
>the left side. So there is no change to put the LCD away to pull the 
>reflection foil away. But you must do this before you can put the 
>backlight panel on it.
>Maybe i would try it, if my ti wasn't a neccessary tool for my math 
>course.

Didn't someone post a while back that those connectors were actually
long enough to allow you to lift the LCD away from the board enough
to get a backlight in?  I seem to recall a statement that they are
folded up so that they look very short, but are actually longer.

----------------------------------
David Knaack <dknaack@genetech.net>
http://www.genetech.net/dknaack


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

Follow-Ups:

Re: TI-H: LED Backlight

From: joachim.armbruster@gmx.de