Re: TI-H: linkport

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: linkport
From: Bryan Wyatt <bryan_wyatt@rocketmail.com>
Date: Thu, 3 Sep 1998 17:19:31 -0700 (PDT)
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
Reply-To: ti-hardware@lists.ticalc.org

Mine did the same. If it's still under warranty send
it to TI, if not read on. I took a 2.5mm jack (mouser
part# 161-2502) and bent down the 3 prongs coming out
of the bottom. Then cut a hole with an xacto for the
new port to stick out of. I then glued the jack to
the PCB(pins away from the PCB) and used a scrap of
ribbon cable to make the connections. This worked
great on my 83. It looks a little strange with a jack
sticking out of the bottom right corner(that's just
where I decided to put it, you can put it anywhere),
but at least I have a link port.

Wyatt 

---Rivenage5@aol.com wrote:
>
> 
> my linkport busted i cant fix it where can i get a
replacement?
> thanks i need this very important
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com

Prev: TI-H: linkport
Next: Re: TI-H: Hardware?
Index(es):
- Main
- Thread