Re: TI-H: CBL clone (METER)

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: CBL clone (METER)
From: Chad Bonner <hbonner@TTACS.TTU.EDU>
Date: Thu, 12 Nov 1998 17:15:00 -0600
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
In-reply-to: <19981112082920.12796.rocketmail@send202.yahoomail.com>
Reply-To: ti-hardware@lists.ticalc.org


How fast does the Z-80 execute an instruction...I have a serial ADC that I
would like to connect directly to my calc but I would have to use the calc
to provide a 200kHz clock to the chip and read back the data between clock
cycles.  Is the Z-80 fast enough to do something like this?




At 12:29 AM 11/12/98 -0800, you wrote:
>
>I've started thinking how to design this circuit and i have a few
>questions to whoever wants it. For the robitics, could you let me know
>how many i/o ports you'd like? Also how many digital in, analog out,
>etc.
>For the meter, what for measurements, etc. BTW, would you like your
>calc turned into a 1 MHz scope? I would so it probably get's into the
>schematic anyway, but i'm asking it so i'd know what you think. I need
>this information to satisfy everyone, so react.
>
>Sayonara,
>
>Neil
>
>
>
>
>
>_________________________________________________________
>DO YOU YAHOO!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
>

Follow-Ups:

Re: TI-H: CBL clone (METER)

From: kaus <kaus@cybrzn.com>

References:

TI-H: CBL clone (METER)

From: Neil <m_groenendijk@yahoo.com>