Re: TI-H: New cases
[Prev][Next][Index][Thread]
Re: TI-H: New cases
With lots of hardware compatibility issues just plugging it in wouldn't
work. Thats like plugging a monitor into your scsi port...you need extra
hardware...
>I would have to disagree on that one.
>I want one for my 92 first. I think also that as far as hooking up an
>color LCD to a calc.. why not the 92? i mean it alraedy has the LCD
>connector built right in.
>
>
>
>>>i will be making them for ALL calcs, 86 and 92 1st.
>>
>>The TI-92 has plenty of space, and I think it should be worried about
>>last. The TI-82 and 85 can have one case, and the TI-83, and 86 can
>>share a case. Start with those. If done properly, you can have a
>generic
>>rear panel and a front panel, one to fit the TI-83/86, and the other
>for
>>the TI-82/85. You can skip silkscreening by mounting the original front
>>half of the calc onto a large hole in the front mold, and then screw
>the
>>back mold onto the original front panel. two larger screws on the top
>>side of the back panel, or tabs, and you have a great case. Look at my
>>post "GREAT looking case!!!" I drew it there. The reason two front
>molds
>>are needed is the 82/85 have a flat squarish case, and the 83/86 have
>>the rounded case. I can even draw up extremely detailed drawings and
>>send them to anyone who want's to examine them.
>>
>>do the 92 last, since it's already too big to fit into a pocket! It has
>>quite a bit of space!
>>
>>The 80 and 81 don't need one since they can't realy be upgraded with
>>anything decent.
>>
>>Richard Piotter
>>richfiles1@hotmail.com
>>
>>The Richfiles TI Page
>>http://www.geocities.com/SiliconValley/Lakes/5081/Richfiles.html
>>
>>
>>______________________________________________________
>>Get Your Private, Free Email at http://www.hotmail.com
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
Follow-Ups: