Re: TI-H: Indiglo Backlight/keylight
[Prev][Next][Index][Thread]
Re: TI-H: Indiglo Backlight/keylight
NONONONONONO!!!!!! You CAN'T cut it with scissors!!!! It won't last very
long! There is a special seal on the outside that does something important!
Anyways, I talked to the guy at Lumitek, who told me all of this
-Robert Brack
reb@netride.com
-----Original Message-----
From: Grant Stockly <gussie@alaska.net>
To: ti-hardware@lists.ticalc.org <ti-hardware@lists.ticalc.org>
Date: Sunday, February 15, 1998 3:38 PM
Subject: Re: TI-H: Indiglo Backlight/keylight
>
>Hey...cool...I'm going to put my name on my bedroom door in EL sheets...
:)
>
>>I have some el media, but it's in the shape of a lettered sign, so I can't
>>use it for a calc. Anyhow, it's a coating applied to a plastic type
>>material, so it's flexible, and you can cut it with scissors. It goes
>>round corners and stuff, you just need two contacts roughly on either side
>>of the material. The stuff I have has leads printed on the plastic to the
>>el bit, and then wires soldered to that. You should be able to buy it in
>>strips or sheets roughly the same width (or height) as a calc screen and
>>just cut off as much as you need.
>>
>
>---
>This message is best viewed on an UltraSparc with a 20" monitor, a T3
>connection and the pine email program. Get it now! This page is worst
>viewed on a PC running Windoze 95 and M$ Internet Explorer. Delete it now!
>
>
>