RE: TI-H: gb?

[Prev][Next][Index][Thread]
References:
LI> 

ok...
yea...

At 11:10 AM 12/7/98 -0800, you wrote:
>
>If you just use a coil, it will just filter out the stuff you want and
>only let the
>stuff on ch 1 (static at this point) through. What Grant said is what is
>needed,
>or use some sort of frequency divider and multiplier (like divide by 3
>and multiply
>by 2 or something like that) to change the carrier frequency to the
>desired range
>
>> ----------
>> From: 	Dan[SMTP:danti@applecyber.dyndns.com]
>> Reply To: 	ti-hardware@lists.ticalc.org
>> Sent: 	Sunday, December 06, 1998 11:44 PM
>> To: 	ti-hardware@lists.ticalc.org
>> Subject: 	Re: TI-H: gb?
>> 
>> 
>> Well this is my problem... I can't modulate to ch.1... is there any
>> kind of
>> device I could build to do it? I mean it should be almost as easy as
>> making
>> a coil - really.
>> 
>> At 10:38 PM 12/6/98 -0900, you wrote:
>> >
>> >>Well let me go off the topic to make Brian happy... Does anyone know
>> how to
>> >>convert a signal from a ch3 NTSC VCR to any other channel (i.e. Ch.
>> 1)? I
>> >>tried finding literature about it on the www, but I was
>> unsuccessful. They
>> >>sell them for a lot of money, although I'm not sure. I tried making
>> a coil
>> >>and changing the width and number of turns, but that didn't turn out
>> >>well... any sug.?
>> 
>
>
References: