Re: TI-H: Digital temperature sensor (LM75CIM-5)
[Prev][Next][Index][Thread]
Re: TI-H: Digital temperature sensor (LM75CIM-5)
On Tue, 18 Nov 1997, Corey Runge wrote:
> Ok, I got the LM75CIM-5 chip and buildt a little circuit board for it but
> when I run the sensor.85s in usgard, I get readings that are not correct.
> It says 0 C and 32 F. I used silicon switching diodes and a capacitor I
> found in some old kit. I think it mught be the capacitor, what kind/size
> should I use. The one I have says: 104M. (capacitors are the little round
> kind of flat yellow/brown/orange guy's right?)
> Thanks,
> Corey
> This message brought to you by Corey Runge, His ISP, and the letter 'W'
>
>
Do you mean it reads 0 C and 32 f when you take a temp reading at room
temperature? I was wondering because 0 C and 32 F are the same.
C:\DOS La Migra! La Migra!
C:\DOS\RUN Vamanos! Corremos!
RUN|DOS|RUN
___________ ______ ___
____ \ / __ / / _ \ Daniel Vlacich
/ / / / / / / / / / \ Montgomery Blair High School
/ / / / /_/ / / / / / You Best Recognize!
/ / / / __ / / / / / email: dvlacich@mbhs.edu
/____/ / / / / / / / / /_______________________________________
_______/ /_/ /_/ /_/ /__________________________________________/
Follow-Ups:
References: