Re: TI-H: SPinTerface build question

Re: TI-H: SPinTerface build question

• To: ti-hardware@lists.ticalc.org
• Subject: Re: TI-H: SPinTerface build question
• From: Bryan Rittmeyer <bryanr@flash.net>
• Date: Fri, 15 Aug 1997 12:25:22 -0400
• References: <Pine.GSO.3.95.970814214016.2632B-100000@earth> <33F44C48.504433E8@flash.net> <33F46864.76A4E67B@nmt.edu>
• Reply-To: ti-hardware@lists.ticalc.org

Nightshadow wrote:
 
> I agree; I realized the problems I was having with my SPinTerface was
> that my batteries were low and when the regulator came on sucking from
> the 5.1 volts there; it dropped to so low that the calc regulator
> couldn't get any power to run the calc... I'm now using a regulator I
> got as a sample from National and it works great!

Could you perhaps give us a part number? That 7805 Rich used is a piece
of crap. :-\

Thanks,

Bryan Rittmeyer
bryanr@flash.net

• Re: TI-H: SPinTerface build question
• From: Nightshadow <foglem@nmt.edu>

• TI-H: SPinTerface build question
• From: Tony Do <tonyd@execpc.com>
• Re: TI-H: SPinTerface build question
• From: Bryan Rittmeyer <bryanr@flash.net>
• Re: TI-H: SPinTerface build question
• From: Nightshadow <foglem@nmt.edu>

• Prev: Re: TI-H: SPinTerface build question
• Next: Re: TI-H: SPinTerface build question
• Index(es):
  • Main
  • Thread