Re: TI-H: TI85 can send but not receive over $4 serial cable
[Prev][Next][Index][Thread]
At 15:55 10-29-96, you wrote:
>I built the $4 serial cable for my TI-85, but I can't seem to send files
>to my calc, only send them from my calc. Very weird.
>
>The information with the link program and the cable say that when a send is
>initiated on the PC, both the red and white (tip and middle of the plug)
>wires should go from -.7V to 4.3V. On my cable, only the middle goes to
>4.3,
>with the top staying at -.7V.
>
>If I receive on the PC, then both go to 4.3V, so I'd presume this to mean
>that the cable is made properly, and the software is working.
>
>Help! ;-)
I have the same problen with my parallel port link. Since this only happens
on my computer (works fine on the ones at school), I assume it's the
computer's fault, not your link. Try it on another computer and see if the
link works.
Nate
Listen...this is now, this is here, this is me.
This is what I wanted you to see. - R.E.M., "So Fast, So Numb"
Visit my nifty homepage! http://www.ime.net/~pamelnat
Nate's R.E.M. Page: http://www.ime.net/~pamelnat/rem.html
This is Nate, signing off...
References: