Re: TI-H: "$5" Parallel Link
[Prev][Next][Index][Thread]
nope thats exactly right.
most likely its the way you put it together, you have the wires right
though.
----------
> From: Robert Bosworth <boz@Spacestar.Net>
> To: ti-hardware@lists.ticalc.org
> Subject: TI-H: "$5" Parrellel Link
> Date: Thursday, November 28, 1996 12:37 PM
>
> I followed all of the instructions that you gave, and it worked almost
> perfect. When I run the test I get on the third test line:
>
> send 02 - read 10 - should be 20
>
> then on the bottom all of them are:
>
> send 00 - read 00 - should be 00
> send 01 - read 00 - should be 20
> send 02 - read 00 - should be 10
> send 03 - read 00 - should be 30
>
> I have the plug in LPT1. The lc85 runs fine as well....but when I run
> the link software it won't send or receive. It just gives me an error!!
> Except for Connect '85 which doesn't do anything.
>
> Also: Instead of sodering onto the 2.5mm plug I cut off the actual plug
> and used the wires underneath. Does anyone know what colors correspond
> to what part on the plug? I came up with:
>
> 1=Red
> 2=White
> 3=Copper with no insulation
> ,--,-- __
> |P| 3| 2| 1|
> |L|__|__'--'
> |U|
> |G|
>
> Do I have 1 and 3 wrong?
>
> Any ideas?
>
> Thanks,
> Robbie Bosworth
References: