TI-H: "$5" Parrellel Link

[Prev][Next][Index][Thread]

TI-H: "$5" Parrellel Link

I followed all of the instructions that you gave, and it worked almost
perfect.  When I run the test I get on the third test line:


send 02 - read 10 - should be 20


then on the bottom all of them are:


send 00 - read 00 - should be 00
send 01 - read 00 - should be 20
send 02 - read 00 - should be 10
send 03 - read 00 - should be 30


I have the plug in LPT1.  The lc85 runs fine as well....but when I run
the link software it won't send or receive.  It just gives me an error!!
Except for Connect '85 which doesn't do anything.


Also: Instead of sodering onto the 2.5mm plug I cut off the actual plug
and used the  wires underneath.  Does anyone know what colors correspond
to what part on the plug?  I came up with:


1=Red
2=White
3=Copper with no insulation
  ,--,-- __
|P| 3| 2| 1|
|L|__|__'--' 
|U|
|G|


Do I have 1 and 3 wrong?


Any ideas?


Thanks,
Robbie Bosworth