Re: TI-H: End of link cable broke off in I/O port
[Prev][Next][Index][Thread]
> > Take the broken plug, put a bit of super glue on the end, and plug it
> > into the calculator so that the broken end touches the part that is
> > broken off in the calculator. Wait a few minuits for the glue to dry,
> > and pull it out. With luck, the broken part will come out. If all else
>
> But you had better be careful to make sure the glue doesn't spread
> around and glue the plug into the link port.. Then you're in *REAL*
> deep.. :)
The glue method was the first thing I tried when my tip broke off. All it did
was glue the tip inside the port and ruin my calculator.
References: