Re: HELP--Parallel Link to TI-86 problem

Re: HELP--Parallel Link to TI-86 problem

• To: CALC-TI@LISTS.PPP.TI.COM
• Subject: Re: HELP--Parallel Link to TI-86 problem
• From: BarCode <BarCode-nospam@HEMPSEED.COM>
• Date: Wed, 31 Dec 1997 12:45:50 -0600
• Organization: VVM, Inc.
• References: <01bd14da$10091a60$13ce98ce@AbeLink>
• Reply-To: BarCode <BarCode-nospam@HEMPSEED.COM>
• Xref: paladin.american.edu bit.listserv.calc-ti:19460

Hey,

I have a Cyrix 6x86 PR-200+ also and using Cal in DOS-Mode, I have been able
to send information from the TI-86 to my computer and gram the LCD Screen
display on the computer, but not able to send info to the calculator.  I get
the same error code.

The plug is the same as the one I got from my TI-92.  I notice that the plug
that came with my TI-86 is tapered in at the end.  Whereas my 92 plug was
straight.  I wonder if that has caused the problem?  Or if it is if it has
damaged my 86?

BC

Kyle Leesman wrote in message <01bd14da$10091a60$13ce98ce@AbeLink>...
>Where can I get a slow down program. I'm having the same problem.
>
>Kyle
>
>>I used half a TI-calc cable, not a stereo plug.  Today I was able to
>>send stuff from the calculator to the computer, using a computer at a
>>local computer place, and one at a friends house.  The former was a
>>Cyrix 686/P200+, and the latter was a Pentium 120.  I tried everything I
>>could think of from changing the port configuration to disabling the
>>cache.  I was only able to send from the calculator to the PC, not the
>>other way.  If I can, tomorrow I will boot to DOS 6.0 and use a
>>slow-down program.  Hopefully it will work.
>>
>>-Jeremy

• Re: HELP--Parallel Link to TI-86 problem
• From: Klukan <renegade@BMT.NET>

• From:

• Prev: Turbo?
• Next: Re: HELP--Parallel Link to TI-86 problem
• Index(es):
  • Main
  • Thread