Re: paralel link ti-82 to pc
[Prev][Next][Index][Thread]
Re: paralel link ti-82 to pc
I make them for $10
Grant
>yes the test programs usually say it doesnt work when it actaully works, use
>the dos program CAL to send something to your calculator to test it and you
>freaking morons cant you see that the paralell pins are numbered??? so all u
>do is put the diodes on the correct ones, i know the plans gives the correct
>numbers, mine worked first time! FOR YOU INCOMPETENT ONES I WILL MAKE YOU
>ONE AND INCLUDE SOFTWARE FOR 20 DOLLARS
>
>Arthur S. McDaniel wrote:
>
>> ofer springer wrote:
>> >
>> > aaaaaaaaaaaaahhhhhhhhhhhhhhhhh!!!!!!!!!!!
>> >
>> > i have been trying to build the 2 diode link using printer port but i
>> > have no idea
>> > why it isnt working
>> >
>> > isnt the pin description in the explanation gif left side right
>> > (mirrored) on my cable exists
>> > inner pin numbering that is diffrent then the numbering in the paralel
>> > link gif.
>> >
>> > anyway, it didnt work both ways
>> >
>> > please, if you have created such a link and have a clue of what the
>> > problem is
>> > reply to my email
>> > thnx
>> I went around and around with this issue, too. I found the problem was
>> that the 2.5 mm plug I bought was not making good contact with the
>> calculator's jack. I finally got it to work when I found a 2.5 mm
>> inline jack and wired the cable to it. I use the calc to calc cable to
>> connect the calculator to the parallel cable, so I didn't have to cut
>> the calc to calc cable.
>>
>> Also be aware that some of the cable test programs are wrong.