Re: paralel link ti-82 to pc
[Prev][Next][Index][Thread]
Re: paralel link ti-82 to pc
yes the test programs usually say it doesnt work when it actaully works, use
the dos program CAL to send something to your calculator to test it and you
freaking morons cant you see that the paralell pins are numbered??? so all u
do is put the diodes on the correct ones, i know the plans gives the correct
numbers, mine worked first time! FOR YOU INCOMPETENT ONES I WILL MAKE YOU
ONE AND INCLUDE SOFTWARE FOR 20 DOLLARS
Arthur S. McDaniel wrote:
> ofer springer wrote:
> >
> > aaaaaaaaaaaaahhhhhhhhhhhhhhhhh!!!!!!!!!!!
> >
> > i have been trying to build the 2 diode link using printer port but i
> > have no idea
> > why it isnt working
> >
> > isnt the pin description in the explanation gif left side right
> > (mirrored) on my cable exists
> > inner pin numbering that is diffrent then the numbering in the paralel
> > link gif.
> >
> > anyway, it didnt work both ways
> >
> > please, if you have created such a link and have a clue of what the
> > problem is
> > reply to my email
> > thnx
> I went around and around with this issue, too. I found the problem was
> that the 2.5 mm plug I bought was not making good contact with the
> calculator's jack. I finally got it to work when I found a 2.5 mm
> inline jack and wired the cable to it. I use the calc to calc cable to
> connect the calculator to the parallel cable, so I didn't have to cut
> the calc to calc cable.
>
> Also be aware that some of the cable test programs are wrong.
Follow-Ups:
References: