Re: LF: TI-92 Modem
[Prev][Next][Index][Thread]
OK, here's some docs for TI-92 Modem v1.1.
When you enter the COM ports, enter just the number, like 1, 2, 3, or 4.
Otherwise it will screw up.
Device settings: The device settings specify what devices are connected (by
the program) and can chat. For example, on Computer <-> TI-92 the modem
cannot be used. On the fourth setting, however, all three devices can
communicate with each other.
Screen settings: These are pretty self-explanatory. One screen, all output
goes to one big window. Split screen, it goes to two or three, depending on
the device setting. I have made it possible (when in device mode 4) to either
have the TI-92 in the middle and the modem on the bottom (of the screen), or
have the modem in the middle and the TI-92 on the bottom. The same applies
for device setting 1 (TI-92 <-> Modem).
Keys: Alt-C clears the computer's window. (if it is there)
Home gets you back to the options screen.
ESC quits the program.
Is this enough, or does anyone need more?
Tilde,
Jeffrey :j
JBridge21@aol.com
References: