A89: Re: Re: LCD change for $1 =)

To: <assembly-89@lists.ticalc.org>
Subject: A89: Re: Re: LCD change for $1 =)
From: "Miles Raymond" <m_rayman@bigfoot.com>
Date: Thu, 4 Nov 1999 20:21:02 -0600
Organization: Expert Internet Services
References: <00f301bf2731$ec09a8c0$0100a8c0@qni.com> <004301bf2732$ef1d8300$0201a8c0@sparta.lu.se>
Reply-To: assembly-89@lists.ticalc.org


Hmm... So in this case, If I would like to use greyscale also, I should just
change the values in graphlib::plane0 and graphlib::plane1?  Is this safe to
do, or are there other implications for tampering with graphlib?

-Miles Raymond      EML: m_rayman@bigfoot.com
ICQ: 13217756       IRC: Killer2        AIM: KilIer2 (kilier2)
http://www.bigfoot.com/~m_rayman/

----- Original Message -----
From: Niklas Brunlid <e96nbr@efd.lth.se>
To: <assembly-89@lists.ticalc.org>
Sent: Thursday, November 04, 1999 8:10 PM
Subject: A89: Re: LCD change for $1 =)

> > This is the first time that I've actually asked for help from the A89
list
> > in quite a long time.  What I want to know is how to shift the address
of
> > the actual LCD.
>
> $600010 contains the address where the LCD hardware reads its data,
divided by
> 8. It's write-only.
>
> > Also, will this work w/ VTI, or is this the thing Olle complains about?
>
> Grayscale relies on this, and grayscale works in VTi... I haven't had any
> problems with it.
>
>  / Niklas Brunlid
> Check out Prosit for the TI-89 / TI-92+ at http://prosit.ticalc.org
> Random PQF Quote follows:
>
> "I can explain it in Dog, but you only listen in Human."
>         -- Gaspode the wonder dog
>            (Terry Pratchett, Moving Pictures)

Follow-Ups:

Re: A89: Re: Re: LCD change for $1 =)

From: Olle Hedman <oh@hem.passagen.se>

References:

A89: LCD change for $1 =)

From: "Miles Raymond" <m_rayman@bigfoot.com>

A89: Re: LCD change for $1 =)

From: "Niklas Brunlid" <e96nbr@efd.lth.se>