A89: official 89 asm info.
[Prev][Next][Index][Thread]
A89: official 89 asm info.
!!!!!!!!!!!!!!!!!!!!!
I got this email from ti. don't get pissed or write them.
!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you for your continued e-mail.
The *un*official word is that it should be ready within the next two
weeks.
I suggest that you check periodically at www.ti.com/calc/docs/89.htm for
more information and updates.
I hope you find this information helpful. If you have any further
questions
or comments please feel free to contact me at your convenience.
Sincerely,
Samson Craft
Visit the TI World Wide Web home page:
www.ti.com/calc
--------------------------------------------------------------------
Educational & Productivity Solutions
Customer Support Center Email: ti-cares@ti.com
Texas Instruments or
PO Box 650311 M/S 3962 scraft@ti.com
Dallas, TX 75265 Phone: 1-800-842-2737 General
Information
1-972-917-8324 Technical
Information
--------------------------------------------------------------------
========================= ORIGINAL MESSAGE ==========================
[ jtanski@provide.net on 10/23/98 8:09:02 PM ]
I'm wery disapointed in you because, i realy didn't buy the calculator
to
play games or do math. It was because i was going to write programs for
it
in my spare time. It seamed like a quite good platform, it's not as big
as
92, you can carry it to school, it has more memory, assemebly
programation
(key point here). Well i would be interested about (+- 2 months) it will
be
aout. Second of all is there a a good cross assembler i could use and a
linker, any one. I could posibly figure out some stuff with having the
write
software. Any info would help like the rom calls, i'm not interasted in
using one of the asm shell out there, because all of the are still in
beta
faze and the calc is soposed to run the maching code. I'm also
interasted
if
there is going to be some info on TSR programs. I might pose these
emails
on
TIcalc.org because a lot of people are mad jus tlike me.
> -----Original Message-----
> From: banderson@ti.com [mailto:banderson@ti.com]
> Sent: Thursday, October 22, 1998 2:45 PM
> To: jtanski@provide.net
> Subject: RE: TI-89 ASM
>
>
>
> Thank you for your message. Unfortunately, I don't have any
> TI-89 assembly
> programming information because it has not been completed yet. As soon
as
> this information is complete, we will place it on our web site at
>
> http://www.ti.com/calc/docs/89.htm
>
> I regret that I cannot offer you any more information than that, but I
> simply do not have an announced time for the assembly documentation to be
> released.
>
> If you have any further questions or comments please feel free to contact
> us at your convenience. For faster service on replies, copy this message
> in the response, and send the response directly to ti-cares@ti.com. Also,
> please address your response to me (i.e. place my name at the top of your
> reply or at the end of the subject line).
>
> Best Regards,
>
> Brigette Anderson
>
> ------------------------------------------------------------------------
> Educational & Productivity Solutions
> Texas Instruments Email: ti-cares@ti.com
> PO Box 650311 M/S 3962 Phone: 1-800-TI-CARES or
> Dallas, TX 75265 (972)917-8324 (technical help)
> Internet: http://www.ti.com/calc/ FAX: (972) 917-0747
> http://www.ti.com/organizers/
> ------------------------------------------------------------------------
>
>
> ========================= ORIGINAL MESSAGE ==========================
>
> [ jtanski@provide.net on 10/22/98 6:14:09 PM ]
>
> > -----Original Message-----
> > From: banderson@ti.com [mailto:banderson@ti.com]
> > Sent: Wednesday, October 21, 1998 2:24 PM
> > To: jtanski@provide.net
> > Subject: Re: TI-89 ASM
> >
> >
> >
> > Thank you for your recent E-mail. We appreciate your support of our
> > products. We feel that getting the calculator hardware to the market as
> > quickly as possible is our first priority and so we dedicate our
> resources
> > to that task rather than to some of the peripheral tasks such
> as assembly
> > information. Now that the TI-89 and TI-92 Plus have been released, our
> > engineers have turned their efforts toward completing this
> documentation.
> >
> > I sincerely regret any inconvenience that not having this
> information may
> > cause you. We realize that the assembly programming abilities are
> > important to our customers and we are striving to prepare this
> information
> > as quickly as possible.
> >
> > If you have any further questions or comments please feel free
> to contact
> > us at your convenience. For faster service on replies, copy
> this message
> > in the response, and send the response directly to
> ti-cares@ti.com. Also,
> > please address your response to me (i.e. place my name at the
> top of your
> > reply or at the end of the subject line).
> >
> > Best Regards,
> >
> > Brigette Anderson
> >
> >
------------------------------------------------------------------------
> > Educational & Productivity Solutions
> > Texas Instruments Email: ti-cares@ti.com
> > PO Box 650311 M/S 3962 Phone: 1-800-TI-CARES or
> > Dallas, TX 75265 (972)917-8324 (technical help)
> > Internet: http://www.ti.com/calc/ FAX: (972) 917-0747
> > http://www.ti.com/organizers/
> >
------------------------------------------------------------------------
> >
> >
> > ========================= ORIGINAL MESSAGE ==========================
> >
> > [ jtanski@provide.net on 10/17/98 3:16:53 PM ]
> >
> > I wan't to write programs in asmembly for my TI-89 calculator but there
> > is no guide or help for doing so. Plses help
> >
> >
> >
> >
> I greatly need asm, calls and help. Plese don't send me the 89 asm wizard
> mesage. I bouth the calculator mainly because asm is built in and it's
> powrfull procesor, which is very good for asm, programing.
>
>
>
>
>