Re: A86: Re: strangeness

To: <assembly-86@lists.ticalc.org>
Subject: Re: A86: Re: strangeness
From: "Greg" <gforceii@crosswinds.net>
Date: Mon, 11 Sep 2000 16:09:18 -0500
References: <20000909.193151.-4021233.6.rabidcow@juno.com>
Reply-To: assembly-86@lists.ticalc.org


same thing happens on rom 1.4 ...

Greg
_________________________________
All parts should go together without forcing. You must remember that the
parts you are reassembling were disassembled by you. Therefore, if you can't
get them together again, there must be a reason. By all means, do not use a
hammer.
-- IBM maintenance manual, 1925

----- Original Message -----
From: <rabidcow@juno.com>
To: <assembly-86@lists.ticalc.org>
Sent: Saturday, September 09, 2000 9:31 PM
Subject: Re: A86: Re: strangeness


>
>
>
> On Sat, 9 Sep 2000 19:46:12 -0600 "David Phillips" <david@acz.org>
> writes:
> > > i created two asm programs on the calc, like this:
> > > :AsmPrgm
> > > :C39853
> > >
> > > one is named "asd" and the other "sdf"
> >
> > I don't follow you at this point.  Put that asm code in _both_
> > programs, or
> > just asd?
> > What do you put in sdf?
>
> it didn't really matter, as long as it's an asm program.  i originally
> used a compined prog, but putting the same code in both worked the same
>
> > > go back into the program editor & edit "asd"
> > > :Asm(sdf3
> >
> > You mean just "Asm(sdf", or really add the "3"?
>
> yes, with the 3.
> if the prog name is 4 letters it doesn't add the 3
>
> > > interesting...
> >
> > What is it supposed to do?  Maybe only on one rom version?
>
> might be rom ver specific.  i've done this with 1.2 & 1.3.  can't test
> anything else, cuz that's all i've got
>
> -josh
>
>
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>

References:

Re: A86: Re: strangeness

From: rabidcow@juno.com