Re: A86: Division
[Prev][Next][Index][Thread]
Re: A86: Division
Perhaps the ti86math.inc will help you...
;
;
; Floating Point Math entry points for TI-86
;
;
_INTGR equ 5468h ; op1 = intgr(op1)
_MINUS1 equ 5470h ; op1 = op1 - 1
_FPSUB equ 5474h ; op1 = op1-op2
_FPADD equ 5478h ; op1 = op1+op2
_TIMESPT5 equ 5484h ; op1 = .5 * op1
_FPSQUARE equ 5488h ; op1 = op1^2
_FPMULT equ 548Ch ; op1 = op1*op2
_FRAC equ 549Ch ; op1 = frac(op1)
_FPRECIP equ 54A4h ; op1 = 1/op1
_FPDIV equ 54A8h ; op1 = op1/op2
;
_SQROOT equ 54ACh ; op1 = sqrt(op1), neg #'s error
_SQROOTP equ 54B0h ; op1 = sqrt(op1), neg #'s ->
complex
;
_RNDGUARD equ 54BCh ; round op1 to 12 digits
;
_LNX equ 54C4h ; op1 = ln(op1), neg #'s error
_LNXP equ 54C8h ; op1 = ln(op1), neg #'s ->
complex
;
_LOGXP equ 54CCh ; op1 = log(op1), neg #'s error
_LOGX equ 54D0h ; op1 = log(op1), neg #'s ->
complex
;
_ETOX equ 54D4h ; op1 = e^op1
_TENX equ 54D8h ; op1 = 10^op1
;
_SIN equ 54E0h ; op1 = sin(op1), current
mode
_COS equ 54E4h ; op1 = cos(op1), current
mode
_TAN equ 54E8h ; op1 = tan(op1), current
mode
;
_TANH equ 54F0h ; op1= hyp tan(op1)
_COSH equ 54F4h ; op1= hyp cos(op1)
_SINH equ 54F8h ; op1= hyp sin(op1)
;
_ACOS equ 5508h ; op1 = inv cos(op1), no complex
results
_ACOSP equ 550Ch ; op1 = inv cos(op1), complex
results ok
;
_ATAN equ 5510h ; op1 = inv tan(op1)
_ASIN equ 5514h ; op1 = inv sin(op1)
;
_ATANH equ 551Ch ; op1 = inv hyp Tan(op1)
_ASINH equ 5524h ; op1 = inv hyp sin(op1)
_ACOSH equ 5528h ; op1 = inv hyp cos(op1)
;
_YTOX equ 5538h ; op1 = op1^op2
~Nick
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
References: