[A83] Re: Interrupt Vector

To: <assembly-83@lists.ticalc.org>
Subject: [A83] Re: Interrupt Vector
From: "Aaron Fineman" <amfineman@earthlink.net>
Date: Wed, 18 Dec 2002 20:39:08 -0500
References: <5.1.0.14.0.20021218162756.00a838f0@mail.comcast.net> <5251.1040254477@www8.gmx.net>
Reply-To: assembly-83@lists.ticalc.org

dosn't always work on my 83+



----- Original Message -----
From: <robvanwijk@gmx.net>
To: <assembly-83@lists.ticalc.org>
Sent: Wednesday, December 18, 2002 6:34 PM
Subject: [A83] Re: Interrupt Vector


> > >On the standard 83, there are two: the timer and the on-key interrupt.
> > >The 83+SE also seems to generate interrupts when things happen to
> > >the link port (insertion of link-cable, removal of cable, or receiving
of
> > >data, anybody knows more?). Whether this applies to the 83+, I don't
> > >know.
> >
> > Is the link cable insert like the ON interrupt?  Doesn't that function
> > just turn on the calc if its off when you insert the cable?
> >
>
> When some "events" occur (see original message) some piece of hardware
> (the link assist???) generates an interrupt. This then has the same effect
> as the on interrupt; technical: it ends the halt instruction, effect: calc
> turns on.
>
> Rob van Wijk
>
> --
> +++ GMX - Mail, Messaging & more  http://www.gmx.net +++
> NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
>
>
>

References:

[A83] Re: Interrupt Vector

From: Gavin Olson <gtolson@comcast.net>

[A83] Re: Interrupt Vector

From: robvanwijk@gmx.net