[A83] Re: Getting the current flash page
[Prev][Next][Index][Thread]
[A83] Re: Getting the current flash page
Actually, 4C4Bh is FindAppDn, not 4C45h. 4C45h will get you the current
flash page, but I'm unsure as to why you would want to spend three bytes
using a B_CALL, instead of two bytes using an input.
-Dan Englender
----- Original Message -----
From: "Edgar Phelps" <edthief69@yahoo.com>
To: <assembly-83@lists.ticalc.org>
Sent: Tuesday, August 14, 2001 11:01 AM
Subject: [A83] Re: Getting the current flash page
>
> 4C45h is FindAppDn, which ,according to the
> developer's guide, doesn't give any information about
> the ROM page. Try B_CALL FindApp (FindApp is 4C4Eh).
>
> HTH
> Ed
> --- Michael Vincent <hookman@worldnet.att.net> wrote:
> >
> > I'm not sure if this is documented as an equate or
> > not, but B_CALL 4C45h
> > will return the current flash page in A.
> >
> >
> > Michael Vincent
> > Detached Solutions - www.detacheds.com
> > Radical Software - www.radicalsoft.org
> >
> > ----- Original Message -----
> > From: "Peter-Martijn Kuipers"
> > <hyper@hysoft-automation.com>
> > To: <assembly-83@lists.ticalc.org>
> > Sent: Tuesday, August 14, 2001 12:25 AM
> > Subject: [A83] Getting the current flash page
> >
> >
> > >
> > > How do I get the current flash page an application
> > is using,
> > > WITHOUT using the input/output ports?
> > > (So, how do I do it with a bcall?)
> > >
> > > --(Peter-Martijn)
> > >
> > >
> > >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
>
>
Follow-Ups:
References: