A83: Re: SOS ---Joe Please look here---

[Prev][Next][Index][Thread]

A83: Re: SOS ---Joe Please look here---


Already done..... well not really but I did fix the problem you are refering
to.

Joe Wingbermuehle
http://www.usmo.com/~joewing/

-----Original Message-----
From: Alan C Johnson <benjamin99@juno.com>
To: assembly-83@lists.ticalc.org <assembly-83@lists.ticalc.org>
Date: Monday, October 19, 1998 7:14 PM
Subject: A83: SOS ---Joe Please look here---


>
>Put a call _clrtextshdw or whatever its equivalent in your equates is
>
>>
>>It wouldn't be practical because you'd have to rewrite the vat to
>>point to
>>the correct locations since SOS and AShell move the data around to
>>allow all
>>of the ram to be used to its fullest. Fixing the vat wouldn't be too
>>difficult I suppose, but it would be useless for the most part.
>>
>>btw, all your dreams are comming true! With SOS v1.6 you can rename
>>prgmA to
>>anything you want and it no longer graphs when you exit! To top this
>>all
>>off, v1.6 is the smallest version yet!
>>I will be releasing it sometime very soon....
>>
>>Joe Wingbermuehle
>>http://www.usmo.com/~joewing/
>>
>>-----Original Message-----
>>From: Linus Akesson <lairfight@softhome.net>
>>To: Joe Wingbermuehle <assembly-83@lists.ticalc.org>
>>Date: Sunday, October 18, 1998 12:56 PM
>>Subject: Re: A83: Re: Where is...
>>
>>
>>>
>>>That's interesting... why not if I may ask?
>>>
>>>Linus
>>>
>>>On 18-Oct-98, Joe Wingbermuehle wrote:
>>>
>>>>I'm afraid that that really wouldn't be practical. :P
>>>
>>>>Joe Wingbermuehle
>>>>http://www.usmo.com/~joewing/
>>>
>>>>-----Original Message-----
>>>>From: Linus Akesson <lairfight@softhome.net>
>>>>To: Joe Wingbermuehle <assembly-83@lists.ticalc.org>
>>>>Date: Sunday, October 18, 1998 6:51 AM
>>>>Subject: Re: A83: Re: Where is...
>>>
>>>
>>>>>
>>>>>WHAT??? Then fix the bloody shell so that it's compatible!
>>(Hmm...)
>>>>>
>>>>>Linus
>>>>>
>>>>>On 17-Oct-98, Joe Wingbermuehle wrote:
>>>>>
>>>>>>You can only do that insert mem thing if you want to make your
>>program
>>not
>>>>>>work in a shell. For about 10 more bytes you could make it work
>>from
>>>>within
>>>>>>a shell or from the home screen. :P
>>>>>
>>>>>>Joe Wingbermuehle
>>>>>>http://www.usmo.com/~joewing/
>>>>>
>>>>>>-----Original Message-----
>>>>>>From: Linus Akesson <lairfight@softhome.net>
>>>>>>To: Joe Wingbermuehle <assembly-83@lists.ticalc.org>
>>>>>>Date: Saturday, October 17, 1998 12:08 PM
>>>>>>Subject: Re: A83: Re: Where is...
>>>>>
>>>>>
>>>>>>>
>>>>>>>If you only need the memory as long as the program is running
>>(which is
>>>>>>often
>>>>>>>the case), you can just use an insertmem/delmem pair, inserting
>>memory
>>at
>>>>>>the
>>>>>>>end of your program. Then have a label at the end of the program,
>>and
>>use
>>>>>>it
>>>>>>>to address the allocated memory.
>>>>>>>
>>>>>>>Another thing Phelan, are you loading this data from an external
>>program
>>>>>>>file? Because in that case you could just look the program up,
>>and it'd
>>>>>>>already be in memory! If you don't, you could try to redesign
>>the
>>program
>>>>>>to
>>>>>>>work in this way, as it saves memory.
>>>>>>>
>>>>>>>Linus
>>>>>>>
>>>>>>>On 17-Oct-98, Joe Wingbermuehle wrote:
>>>>>>>
>>>>>>>>In Chip83 I allocate 3810 bytes of ram by creating a temporary
>>program.
>>>>I
>>>>>>>>think creating a program is probably your best bet, instead of
>>making
>>>>your
>>>>>>>>program 2k bigger.
>>>>>>>
>>>>>>>>Joe Wingbermuehle
>>>>>>>>http://www.usmo.com/~joewing/
>>>>>>>
>>>>>>>>-----Original Message-----
>>>>>>>>From: Phelan Wolf <phelanwolf@hotmail.com>
>>>>>>>>To: assembly-83@lists.ticalc.org <assembly-83@lists.ticalc.org>
>>>>>>>>Date: Friday, October 16, 1998 9:54 PM
>>>>>>>>Subject: Re: A83: Re: Where is...
>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>>>ok, I thought that SAVESCREEN and APD are two separate things.
>>Thanks
>>>>>>>>>anyway.  I need 2024bytes to load 4 blocks, 72 map squares per
>>block,
>>>>>>>>>each block is 108bytes.  So I used SAVESCREEN for misc vars,
>>and
>>>>>>>>>STATVARS for the map table, I guess I'll have stuff inside my
>>prog
>>for
>>>>>>>>>the rest.
>>>>>>>>>
>>>>>>>>>-Phelan 'Amen' Wolf
>>>>>>>>>
>>>>>>>>>>APD RAM is at $8265, 768 bytes.
>>>>>>>>>>btw, a good way of allocating memory under a shell is to
>>create a
>>>>>>>>>program,
>>>>>>>>>>then delete it when it is no longer needed.
>>>>>>>>>>
>>>>>>>>>>Joe Wingbermuehle
>>>>>>>>>>http://www.usmo.com/~joewing/
>>>>>>>>>>
>>>>>>>>>>-----Original Message-----
>>>>>>>>>>From: Phelan Wolf <phelanwolf@hotmail.com>
>>>>>>>>>>To: assembly-83@lists.ticalc.org
>><assembly-83@lists.ticalc.org>
>>>>>>>>>>Date: Friday, October 16, 1998 6:50 PM
>>>>>>>>>>Subject: A83: Where is...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>Joe, Linus, matt, or somebody, where is the APD found???
>>Need it
>>to
>>>>>>>>>sto
>>>>>>>>>>>stuff in, a level map containing data of where crap be
>>found.
>>>>>>>>>>>
>>>>>>>>>>>-Thanks:  Phelan 'Amen' Wolf
>>>>>>>>>>>
>>>>>>>>>>>______________________________________________________
>>>>>>>>>>>Get Your Private, Free Email at http://www.hotmail.com
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>______________________________________________________
>>>>>>>>>Get Your Private, Free Email at http://www.hotmail.com
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>>
>>
>
>___________________________________________________________________
>You don't need to buy Internet access to use free Internet e-mail.
>Get completely free e-mail from Juno at http://www.juno.com
>or call Juno at (800) 654-JUNO [654-5866]
>